iPod

iPod wired connection guide Steps Description

1. Turn on the Streamer and the iPod.
2. Connect the two devices via the connecting cable supplied with the Streamer. 
3. One end of the cable plugs into the headphone jack of the iPod and the other end plugs into the headphone jack of the Streamer. 
4. Start music playback on the iPod and press the music button on the Streamer. 
5. The music button lights up. You should now be able to hear music from the Epoq. 
6. Volume can be controlled via the iPod volume settings and the Streamer’s volume button.ه

iPod and Jabra Bluetooth adapter A125s connection guide
Jabra Bluetooth adapter set-up process

1. Attach the Jabra to the iPod and make sure it fits snugly.
2. Start with the Jabra adapter off.ه
3. Press and hold the button on the Jabra until the led is solid blue. This will put the Jabra in pairing mode to connect with the Streamer.ه
4. Put Streamer in pairing mode and after a few seconds, the Jabra will connect automatically with the Streamer.ه
5. The solid blue light on the Jabra will blink slowly blue if the connection is successful.ه

*Play music on the iPod and confirm that the music is heard via the Epoq.

How-to put Streamer in pairing mode.

1. Make Sure the key lock on the top of the Streamer is unlocked. (Green Area visible)
2. Ensure that the Bluetooth button is switched off. If the Bluetooth button light fades in and out, it is on, and you will need to turn it off by pressing the Bluetooth button for about 2 to 3 seconds.ه
3. Now starting with the Bluetooth powered off, press and hold the Bluetooth button for about 4-5 seconds or until it flashes repeatedly.ه

*The Streamer is now in pairing mode and ready to be paired. The pairing mode on the streamer will last for about 120 seconds or two minutes.